Routers

Routers

A router is an extremely versatile tool. It’s another spinning tool requiring all long hair and loose clothing to be tied back/up… The motor housing sits in a frame that allows you to adjust the blade’s depth via raising and lowering the motor. The frame...
Rotozip

Rotozip

 As seen on TV! The RotoZip. Yup, that tool you see on TV, late at night. The very kind folks at the RotoZip company sent us a few units to try out. Here, we're setting up to cut the circles for Anythig goes.  We cut a couple of circular jigs to guide the RotoZip....
Sanders

Sanders

This belt sander will take a lot of material off a piece of wood. be careful not to gouge the out the wood. Belt sanders will leave small lines if you're not very careful. Two handles should be used for getting the best performance from a belt sander. These things...
Circular Saw

Circular Saw

This is a blurry circular saw. Don’t worry, it still cuts in focus. The blade spins counter clockwise, thus pushing the wood chips up into the dust guide. Take a close look and you’ll see a hole just to the left of the number 2. In this shot you see my...
Sabre Saw

Sabre Saw

This is a Sabre Saw, aka, Jig Saw. This saw uses a blade that travels up and down. This cut is being bad using a piece of wood as a straight edge. The line that needs to be cut was marked at both ends, then the wood was placed 1 1/4" from the line. This is the...